Caliach Vision Faults Fixed up to V1.1100

B0347 - G/L Journal would not save

Date: 20 May 2002, version: 1.1001, rating: 100, platforms: All

Description: When there was a zero value of both credit and debit in a line, after the yes/no question the journal would clear without being saved.

Get around: None

Caliach response: wAcGlJournal

B0348 - A/R Credit Note (not return) - A/C and description reverting on entering quantity

Date: 13 May 2002, version: 1.1001, rating: 20, platforms: All

Description: If you select a non-stock part number for a line in a non-return credit note, and then change the default description and/or account posting code, they both revert to standard after tabbing out of the quantity field. This necessitates re-keying the data and making sure the quantity field is not entered again, to maintain the desired data. Also quantity change for a non-stock part would cause problems.

Get around: Enter return quantity before changing the default part description or account code.

Caliach response: wAcArInvChange

B0349 - Capacity Planning - make to listing available qty reversed logic

Date: 14 May 2002, version: 1.1001, rating: 20, platforms: All

Description: Before works order are kitted, they incorrectly show as available for the first operation. When you subsequently kit them, they then show as zero quantity available. Likewise backfllushed orders show none available for the first op. even though there is no intention to kit them and work can proceed on the first op. Available quantities for subsequent operations correctly show the qty booked through the previous op.

Get around: None

Caliach response: taCapacity

B0350 - Receiving PO in batches does not abide by oversupply variance

Date: 20 May 2002, version: 1.1001, rating: 20, platforms: All

Description: When receiving goods in more than one batch the oversupply variance was assessed on the balance due not the ordered quantity.

Get around: None

Caliach response: wPolReceive

B0351 - Batch Tracking - tracing destinations of supplies multi-level

Date: 8 May 2002, version: 1.1001, rating: 30, platforms: All

Description: For a product with a 3 level BoM, all batch tracked, tracing destinations and sources works fine except when tracing destinations of a batch from the lowest level (PO receipt). Then it only goes as far up as the work order issues relating to the batch, not right up to dispatch. Going the other way (tracing sources) from the top level shows all levels fine.

Get around: Use tracing sources.

Caliach response: wTckList, cVersion

B0352 - Currency Revaluation of G/L Accounts across Periods

Date: 30 May 2002, version: 1.1002, rating: 100, platforms: All

Description: When a revaluation of G/L asset foreign currency accounts revalues transactions from future periods any adjustment for future periods is made in the current period. This has the effect of putting the balance sheet out of balance for the current period, although after month end it goes back into balance.

Get around: Do not revalue G/L accounts unless you do not have future period transactions on those accounts.

Caliach response: wAcCurrency

B0353 - oCustom1 ScratchPad custom menu lines do not operate

Date: 30 May 2002, version: 1.1002, rating: 20, platforms: All

Description: Protected ScratchPad menus could not have methods assigned and therefore oCustom1 custom ScratchPad menu items failed to operate custom code.

Get around: None

Caliach response: mScratchCustomers, mScratchGL, mScratchParts, mScratchSuppliers

B0354 - G/L Journal reversing and recurring parameters non-edit

Date: 30 May 2002, version: 1.1002, rating: 30, platforms: All

Description: Journal parameters could not always appropriately be edited to change future operation of a recurring or reversing journal.

Get around: None

Caliach response: wAcGlJournal

B0355 - Standard texts are not in alphabetical order

Date: 21 May 2002, version: 1.1002, rating: 20, platforms: All

Description: In some places where standard texts are used they are not sorted by code which makes it difficult to find the one you require. This is true for BOM maint., Process Routes and Parts (works text). It may also be true in other places.

Get around: None

Caliach response: oDatabase, wBomMaint, wCusEdit, wDelEdit, wEngEdit, wJbiMaintSub, wPoMaint, wProMaint, wPtmEdit, wSupEdit, wTxtEdit, cVersionNo

B0356 - Help for Workflow Alert Triggers Maintenance window unavailable

Date: 19 Jun 2002, version: 1.1003, rating: 20, platforms: All

Description: Appropriate help page was not available from the window

Get around: None

Caliach response: wTriggerMaint

B0357 - Printing CBD Invoice would not operate

Date: 12 Jun 2002, version: 1.1003, rating: 30, platforms: All

Description: Unable to print either custom invoice format of standard format from print invoice menu. Print process to any destinations just returns you to the selection window and invoice remains un-printed.

Get around: None

Caliach response: oProcessSales

B0358 - Ledger Calendar Maintenance problem with imported ledger setup

Date: 19 Jun 2002, version: 1.1003, rating: 10, platforms: All

Description: If ledger settings were imported with the ledger calendar deleted in the import file, you could not edit the dates on the new calendar.

Get around: None

Caliach response: wAcBudgdates

B0359 - System currency cent character not being reflected in some documents

Date: 19 Jun 2002, version: 1.1003, rating: 30, platforms: All

Description: Some documents were applying a string character 'p' for the currency cent character rather than the company details value.

Get around: None

Caliach response: oProcessSales, rAcStateSuper, rPurchSuper

B0360 - Jobbing - Job Performance Review planned cost not extended by quantity

Date: 13 Jun 2002, version: 1.1003, rating: 20, platforms: All

Description: The planned cost total is not multiplied by item quantity, whereas the actual cost is.

Get around: None

Caliach response: wJobPerform

B0361 - Jobs - Print Reports - rJobStatus - actual profit shown based on currency

Date: 13 Jun 2002, version: 1.1003, rating: 10, platforms: All

Description: The planned and actual profit were shown in the currency of the job rather than local currency.

Get around: None

Caliach response: rJobStatus

B0362 - Serial number assignment did not go down more than level 2

Date: 19 Jun 2002, version: 1.1003, rating: 30, platforms: All

Description: In serial number maintenance, when a serial number structure was to be assigned, only the first and second levels would accept drag and drop assignment.

Get around: None

Caliach response: wSnoEdit, cVersionNo

B0363 - Serial number assignment not possible on 2nd item of level 2

Date: 22 Jun 2002, version: 1.1004, rating: 30, platforms: All

Description: If there was more than one second or lower level item, it could not be assigned.

Get around: None

Caliach response: wSnoEdit

B0364 - Printing PO outwork kitting listed inappropriately

Date: 22 Jun 2002, version: 1.1004, rating: 20, platforms: All

Description: If an outwork operation or non-part line item followed an outwork assembly, the kit listed appeared on both lines.

Get around: None

Caliach response: rPurchSuper

B0365 - CBD Invoice would sometimes not print

Date: 8 Aug 2002, version: 1.1005, rating: 60, platforms: All

Description: CBD Invoices would not print individually.

Get around: None

Caliach response: oProcessSales, wInvoiceList, wInvNoSelect

B0366 - Delete a Part with History failed

Date: 8 Aug 2002, version: 1.1005, rating: 20, platforms: All

Description: You could not delete a part if there was cost log entries for it.

Get around: None

Caliach response: cPartsCmd

B0367 - Importing Sales History inappropriately set order number

Date: 8 Aug 2002, version: 1.1005, rating: 40, platforms: All

Description: Importing sales history would set imported orders to Hnnnnn which subsequently could not be accessed.

Get around: None

Caliach response: cImpImport

B0368 - Environment window causes hang on Macs

Date: 8 Aug 2002, version: 1.1005, rating: 40, platforms: Mac OS9 only

Description: When opening the Environment window using a Mac the machine would hang.

Get around: None

Caliach response: wEnvironmentDesigner

B0369 - Process Route Maintenance - print route sort error

Date: 23 Jul 2002, version: 1.1005, rating: 10, platforms: All

Description: In process route maintenance, selecting print route or print costed route results in the operations not being listed in sequence. All other modes of printing the route seem to sort OK.

Get around: None

Caliach response: cRoute

B0370 - Capacity Planning Make-To-Listing - available quantity error

Date: 23 Jul 2002, version: 1.1005, rating: 20, platforms: All

Description: Make-To reports would not show correct Available under all circumstances.

Get around: None

Caliach response: taCapacity

B0371 - Work Order kit list redraw error on review window

Date: 8 Aug 2002, version: 1.1005, rating: 10, platforms: All

Description: The kit list did not re-build under certain circumstances.

Get around: None

Caliach response: wWoShow

B0372 - Forecast and Auto-Plan could give wrong physical with alias parts

Date: 8 Aug 2002, version: 1.1005, rating: 20, platforms: All

Description: When an Alias part was viewed initial physical quantity could be spurious.

Get around: None

Caliach response: wMpsFore

B0373 - Return kit from WO with shortages could leave shortages

Date: 8 Aug 2002, version: 1.1005, rating: 60, platforms: All

Description: When doing a full return of a work order which has some items fully recorded as shortages, the fully short items remained on the shortage file as orphans.

Get around: None

Caliach response: oProcessWorks

B0374 - Document addresses could get confused country names

Date: 8 Aug 2002, version: 1.1005, rating: 50, platforms: All

Description: The country name could be confused in certain combinations of address in Sales Orders, Invoices and Jobs.

Get around: None

Caliach response: rInvoiceSuper, rJobSuper, rSalesSuper

B0375 - Parts roll-up mass for all parts could fail to update parts

Date: 8 Aug 2002, version: 1.1005, rating: 25, platforms: All

Description: Parts single-level or all parts mass roll up could fail to save new mass in part records.

Get around: None

Caliach response: cPartsCmd

B0376 - Serial Number List on PO Receive is incorrect

Date: 7 Aug 2002, version: 1.1005, rating: 30, platforms: All

Description: When you try to receive multiple serial numbered items (marked for SN on receive) on a PO: The list that allows you to enter the serial numbers is incorrect as it shows the wrong part numbers. If you had two items and you were receiving one of each the list would show two of the first (dependent upon list order) part number rather than one of each. If you had two of the first and one of the second you would get three of the first PN in the list. Now, if you had three items (1 of each) you would get two of the first item, one of the second and none of the last. If you had four items (1 of each) you would get two of the first, two of the second and none of the other two. I hope you understand that, the result of this is that you can not receive more than one serial numbered item on a PO at any one time. Of course, we do this quite often :-)

Get around: None

Caliach response: wPolReceive

B0377 - Update part cost from WO Performance window gave wrong cost

Date: 8 Aug 2002, version: 1.1005, rating: 40, platforms: All

Description: When a work order had been received as two or more batches the cost was inappropriately multiplied by the number of batches.

Get around: None

Caliach response: wWohPerform, cVersionNo

B0389 - Confirm PO Prices wrongly valued outwork assemblies

Date: 27 Aug 2002, version: 1.1006, rating: 25, platforms: All

Description: With an outwork assembly, confirming the PO price failed to correctly accumulate material and labour costs.

Get around: Use Update Cost or other cost update methods on the part

Caliach response: oProcessPurch, cVersion

B0390 - A/P Invoices and Credits posting to currency account

Date: 28 Aug 2002, version: 1.1007, rating: 80, platforms: All

Description: When the posting account is a foreign currency account the posting values were inappropriately set to the inverse of the exchange rate.

Get around: None

Caliach response: wAcApInvrec, cVersionNo

B0391 - Importing of G/L Accounts fails

Date: 5 Sep 2002, version: 1.1008, rating: 10, platforms: All

Description: When using the Data Transfer Utility to import G/L accounts, records were rejected inappropriately.

Get around: None

Caliach response: cImpImport

B0392 - Work History cost error on multiple batch receipts

Date: 5 Sep 2002, version: 1.1008, rating: 80, platforms: All

Description: If more than one batch of a WO is received, the second and subsequent receipts saved an inappropriately large component cost.

Get around: None

Caliach response: oProcessWorks, cVersionNo

Back to Program Changes Contents