Caliach Vision Faults Fixed up to V1.2000

B0378 - Work Order maintenance excessive messages

Date: 8 Aug 2002, version: 1.2000, rating: 10, platforms: All

Description: When creating a Work Order, interacting with the Scratchpad could lead to messages that were not needed.

Get around: None

Caliach response: wWkoMaint

B0379 - Sales History Analysis report variance

Date: 8 Aug 2002, version: 1.2000, rating: 10, platforms: All

Description: Sales history analysis report could yield excessively large variance numbers.

Get around: None

Caliach response: rSahAnalDV, rSahAnalSQ, rSahAnalSV

B0380 - Serial number maintenance structure selection

Date: 8 Aug 2002, version: 1.2000, rating: 20, platforms: All

Description: In serial number maintenance structure list, when selecting top parent, the serial number list was not built for that part.

Get around: None

Caliach response: wSnoEdit

B0381 - Updating Purchase Part Details from Purchase Order

Date: 1 Jul 2002, version: 1.2000, rating: 10, platforms: All

Description: If you have a line item on which you have set the desired quantity. If you then click the button to edit the purchase part details to, say, change a description or supplier part number. After you return to the order, the line item is updated with the new values. This is fine except the quantity is returned to the minimum order qty. This is wrong - it should remain as it was except when it is now less than the minimum. Any updated price breaks should reflect through. This is because if you do not notice the change, you will accidentally order the minimum rather the qty you originally wanted.

Get around: None

Caliach response: wPolMaintSub

B0382 - Engineering Scratchpad Behaviour

Date: 11 Jul 2002, version: 1.2000, rating: 10, platforms: All

Description: In Engineering data, selected parts do not get added to the scratchpad if: 1) you do a find for document and your criteria is partial (i.e. you want drawing ABDC and you type ABC). It still finds it but it doesn't go into the scratchpad. 2) if you use the drawing forward/back buttons to change document. This changes the part number but again does not put the part in the scratchpad.

Get around: None

Caliach response: wCptEdit, wEngEdit, wPptEdit

B0383 - CBD Invoice for Factoring Agency - credit must be on customer, not agency

Date: 3 Jul 2002, version: 1.2000, rating: 10, platforms: All

Description: If a customer is marked with an alternative posting code for factoring purposes, and a sales order is made subject to a CBD invoice, the dispatch can not be made until there is credit on the customers account. This means that when the invoice is posted onto the factor as usual, there is no payment to match it to. Having sufficient unallocated credit at the factoring agents does not allow the dispatch.

Get around: None

Caliach response: oProcessSales

B0384 - BOM window does not rebuild

Date: 17 Jul 2002, version: 1.2000, rating: 10, platforms: All

Description: If you have an assembly shown in the BOM window and a component is deleted by another user. Your version of the bom is not updated even if you go "Select Parent" and pick it again. It will only update if the BOM window is closed and re-opened. It will never automatically reflect changes on the server without a Select Parent.

Get around: None

Caliach response: wBomMaint

B0385 - Assign Serial Number to SO for Phantom of a Phantom

Date: 29 Jul 2002, version: 1.2000, rating: 20, platforms: All

Description: In product serial numbering\assignments the "Include Kits" tick box only includes Sales Orders where the component's parent is a phantom and is on a Sales Order. It will not include SOs where the component is in a phantom, which is in a phantom, which is on a Sales order. If you know what I mean :-) Basically it needs to find SOs for multi-level phantoms.

Get around: None

Caliach response: wSnoEdit

B0386 - MRP Results for Phantom - listed as direct demand

Date: 9 Aug 2002, version: 1.2000, rating: 20, platforms: All

Description: Training data - run MRP on SO demand only. Direct demand of 1 is listed for the phantom kit PAC0005 in MRP results, and it is possible to raise a WO for it from MRP results.

Get around: Do not raise work orders for phantom assemblies, or delete orders if created in error.

Caliach response: oProcessMrp

B0387 - Parts mass roll-up for all parts requires a part to be selected

Date: 22 Aug 2002, version: 1.2000, rating: 10, platforms: All

Description: In parts maintenance when you operate the Mass Roll-Up for all parts, nothing happens unless you have a part selected.

Get around: Select a part then run the operation.

Caliach response: cPartsCmd

B0388 - CBD Invoice - dispatch sale does not respect credit limit

Date: 20 Aug 2002, version: 1.2000, rating: 10, platforms: All

Description: A dispatch sale for a CBD invoiced SO is not prohibited when there is insufficient credit on customer account. The subsequent invoice prints as paid although there is no payment. Payment is possible in the normal way.

Get around: Do not carry out dispatch sale on CBD invoiced sales order.

Caliach response: wSoMaint

B0393 - Print Error on Cheque Summary Report

Date: 5 Sep 2002, version: 1.2000, rating: 10, platforms: All

Description: When printing a range of checks on the summary report (871-900) I get error "E101650 Print Manager Error, Specified report position is out of range - cannot debug as rAcCheckSum is locked and cannot be modified". If I print less than 29 checks it is OK, but last time I ran the report it printed 799-845 OK. Printing on another machine allows the full range, but I cannot use that as the report spacing is then slightly wrong. Also allocation vale was incorrectly set to the transaction value.

Get around: Print a smaller range of cheques as appropriate.

Caliach response: rAcRemitCheckSum

B0394 - Sales order reports have no selection range legend at the bottom

Date: 3 Sep 2002, version: 1.2000, rating: 10, platforms: All

Description: There is no selection ranges indication section at the bottom of the sale order status report.

Get around: None

Caliach response: rSolStatus, rSolDates, rSolStatusLoad, rSolCommission

B0395 - Workflow Alert Check - WO late for kitting error

Date: 11 Sep 2002, version: 1.2000, rating: 10, platforms: All

Description: The report included kitted work orders and backflush work orders inappropriately.

Get around: None

Caliach response: oAlertChecks

B0396 - Sales Orders and Jobs with parts keyword find problem

Date: 11 Sep 2002, version: 1.2000, rating: 20, platforms: All

Description: When using Keyword Search to identify a part on a Job or Sales Order, full details of the part could fail to be loaded.

Get around: None

Caliach response: wJbiMaintSub, wSolMaintSub

Back to Program Changes Contents