Reference Contents > Works History > Work Operation Tracking
This window is the primary data entry window for the Work Tracking system. You can manually enter data, however, it is primarily designed to be used with wedge barcode readers.
Two sets of data are needed for real time work tracking.
The first set is activity data, which is:
These are concatenated together with dashes to make a single data entry string, for example 000001-010-0, indicating setup on operation 10 of work order 000001.
This data can be printed as a barcode on Work Orders, two for each operation of the route. One for Setup and one for Runtime. The user can then just swipe one or other to record this activity data.
NOTE: The barcode reader must be configured so that the terminator character appended by the reader is an Enter. The program will then automatically move to the next set of data and wait for entry.
CUSTOM CAPABILITY: The default barcode fonts used in the program are C39 AIAG B-3 24pt LJ3 for Windows and C39 High 36pt LJ4 for Macintosh. These can be changed with a custom #WIRFONTS or #MARFONTS system classes.
When you need to log to Special Tracking Orders it is best to use a sheet of barcodes or labels. These can be printed from the Special Tracking Orders function. There are no setup or runtime alternatives, as any activity on a Special Tracking Order has zero operation number and is considered setup.
The second set of data is employee data, which is:
These are concatenated together with a dash to make a single data entry string, for example 5200-0, indicating employee 5200 is starting a work activity.
This data can be typically part of an employee badge and can be printed as barcode label (standard Avery L7163) from File -- System Manager -- Employees.
When you operate the Work Tracking Input function, the window opens with no data. The list area will show only entries made since you open the window. Note that, unlike other program windows, the Cancel button clears the data entry fields ready for a new input data set, and does not close the window or cancel the edit process.
The status bar at the bottom of the window will show any error, warning or status messages.
The system has the capability of automatically recording the completion of Work Order operations as though you were doing so in the Shopfloor Data function. To record completion, check the Record Quantities checkbox and two additional entry fields become exposed. This additional data needs to be entered through the keyboard. If you enter a scrapped quantity you may also provide a scrap reason code (optionally selected from the Show list).
To make a data entry, first swipe the Work Order operation barcode, or Special Tracking Work Order barcode, then the employee label start barcode. Those two swipes, if correct, will cause the data to be recorded and added to the list. The window status returns automatically to be ready for another data set entry.
When you record the end of an operation, the start record previously made will be located and the finish time recorded on it. That tracking record will then have been completed. A default time of 12 hours is allowed between starting and finishing before a separate finishing-only tracking record is created. This is necessary to resolve the problem of an employee not recording the finish of an operation before he leaves in the afternoon.
NOTE: The option optWorkTrackingLateHrs is available to change the time permitted for a finish event to be recorded after which a new tracking record is created. The default is 12 hours unless you enter a numeric value against optWorkTrackingLateHrs.
NOTE: The system option optWorkTrackingOpSeq is available to force operations to be entered in sequence. If this is not set, operations can be recorded in any order.
TIP: You can use the optWOShopReceive option in Settings Maintenance at any level to have the system automatically open the appropriate Receive Work Order Assemblies from Production or Backflush Work Order window automatically pre-loaded when you record the completion of a quantity on the final operation.
The listing shows results for the session. The list shows the key information of employee code, work order, operation number and setup (S) or runtime (R), plus the Log status of whether the record is currently open (On) or has been finished (Off), then the start and finish date and times, and finally a comment.
To enter a comment, simply double-click on the line. The Work Tracking Comment window will open where you can enter your comment text.
Work Tracking records can be amended and analysed in the Work Tracking Analysis window.
Work Order - Operation - Set or Run
Tracking event operation input in the form Work Order - Op No - Set or Run entry, normally by barcode scan.
Employee - Logon or off
Employee input in the form Employee code - Start or End entry, normally by barcode scan.
Check this option if you wish to record assembly operation completion.
Quantity of the assembly completed.
Quantity of the assembly scrapped.
Scrap Reason Code
Scrap reason code entry is only possible when a scrap quantity has been entered.
Scrap Reason Description
Click to show a list of available scrap reason codes.
Scrap Reason Popup List
List of available scrap codes. Double-click to assign.
List of events recorded so far this session. Enter or change a comment in the list or by double-clicking.
TIP: To edit cells in the list, select the line and click in the cell and hover the mouse over the cell. I.E. click once and pause with no mouse movement. The cell will then expand into an editable box in which you can enter different data. On leaving the box with any action like a tab or click elsewhere, the data is verified and the list returns to normal with the new data shown in the cell.
Aborts the process currently in session. The keyboard equivalent is the Esc key for Windows computers and Command-.(full stop or period) for the Mac.
The OK button updates the data you have entered, or confirms the selection and/or processes the function you have called.
|See also: -|
Compiled in Program Version 3.10. Help data last modified 24 MAY 2004 14:20. Class wWtkInput last modified 22 AUG 2010 06:05:27.
Reference Contents > Works History > Work Operation Tracking